| 7AI351.70 | 2003 analog input module, 1 input, | 7AF101.7 | 2003 adapter module, 4 slots for screw-in modules | | 7AI294.7 | 2003 analog input module, 4 inputs, potentiometer evaluation, 13-bit, screw-in module | 7AF104.7 | 2003 high-speed adapter module, 4 slots for screw-in modules | | 7TB712:91-02 | 2003 B&R terminal block, 12 pin 20 pieces, cage clamp | 7BP701.0 | 2003 module rack for 1 module incl. left and right side sections | | 7TB718.9 | Accessory terminal block, 18-pin, screw clamps 1.5 mm | 7BP701.1 | 2003 module rack for 1 module, incl. right side section | | 7DM465.7 | 2003 digital mixed module, 16 inputs 24 VDC, 1 ms, sink, 16 transistor outputs, 24 VDC, 0.5 A, order 2x TB718 terminal blocks separately. | 7BP702.0 | 2003 module rack for 2 modules, incl. left and right side sections | | 7AI261.7 | 2003 analog input module, 1 full-bridge strain gauge input, 24-bit, screw-in module | 7BP702.1 | 2003 module rack for 2 modules, incl. right side section | | 7AI354.70 | 2003 analog input module, 4 inputs, | 7BP703.0 | 2003 module rack for 3 modules, incl. left and right side sections | | 7AI774.70 | 2003 analog input module, 4 inputs, 0 to 20 mA, 12-bit, screw-in module, order 1x TB712 terminal block separately. | 7BP704.0 | 2003 module rack for 4 modules, incl. left and right side sections | | 7AO352.70 | 2003 analog output module, 2 outputs, | 7BP705.0 | 2003 module rack for 5 modules, incl. left and right side sections | | 7AM351.70 | 2003 analog mixed module, 1 input, | 7BP706.0 | 2003 module rack for 6 modules, incl. left and right side sections | | 7AT324.70 | 2003 analog input module, 4 temperature inputs (2-wire connection), KTY10 -50 to +150 | 7BP707.0 | 2003 module rack for 7 modules, incl. left and right side sections | | 7AT352.70 | 2003 analog input module, 2 inputs, PT100 (3-wire connection), -200 to +850 | 7BP708.0 | 2003 module rack for 8 modules, incl. left and right side sections | | 7AT664.70 | 2003 analog input module, 4 inputs, thermocouple, -270 to +1372 | 7BP709.0 | 2003 module rack for 9 modules, incl. left and right side sections | | 7AT351.7 | 2003 analog input module 1 input, PT100 (3-line connection) -200 to +850 degrees C Screw-in module | 7BP710.0 | 2003 module rack for 10 modules, incl. left and right side sections | | 7AT664.70-1 | 2003 analog input module 4 inputs, thermocouple 50 Hz noise suppression -270 to +1768 degrees C Screw-in module Order terminal block TB712 separately! | 7DI135.70 | 2003 digital input module, 4 inputs 24 VDC, sink, incremental encoder operation: 50 kHz, event counter operation: 100 kHz, 1 comparator output 24 VDC, screw-in module, order 1x TB712 terminal block separately. | | 7AI984.70 | 2003 Power Measurement Modul, 3 Current Inputs for 1A external current converter, one can be switched to an internal current converter ( | 7DI138.70 | 2003 digital input module, 10 inputs 24 VDC, sink, 2 inputs for event counter operation, input frequency 20 kHz, screw-in module, order 1x TB712 terminal block separately. | | 7IF371.70-1 | 2003 interface module, 1 CAN interface, usage only with frame driver, Electrically isolated, network-capable, Screw-in module | 7DI140.70 | 2003 digital input module, 10 inputs 24 VDC, sink, 2 inputs for event counter operation or for direction dependant position evaluation, input frequency 50 kHz, 4 inputs can be used as high-speed inputs (e.g. gate, frequency measurement - only at CPU interface), screw-in module, order 1x TB712 terminal block separately. | | 7NC161.7 | 2003 encoder module, input frequency 100 kHz, incremental or absolute, 32-bit, encoder supply 5 VDC or 24 VDC, screw-in module | 7DI435.7 | 2003 digital input module, 8 inputs 24 VDC, 1 ms, sink/source, order 3x 7TB710 terminal blocks separately. | | 7AC010.9 | 2003 bus cover, 5 pcs. | 7DI439.7 | 2003 digital input module, 16 inputs 24 VDC, 1 ms, sink/source, order 3x TB718 terminal blocks separately. | | 7TB710:91-01 | 2003 B&R terminal block, 10 pin 30 pieces, cage clamp | 7DI439.72 | 2003 digital input module, 16 inputs 24 VDC, 1 ms, sink/source, 2 electrically isolated input groups | | 7AC011.9 | 2003 stress relief attachment, 5 pcs., incl. mounting material | 7DI645.7 | 2003 digital input module, 8 inputs 100-240 VAC, 50 ms, order 3x 7TB710 terminal blocks separately. | | 7AC020.9 | 2003 bus cover, 1 pc. | 7DM435.7 | 2003 digital mixed module, 8 inputs 24 VDC, 1 ms, sink/source, 8 transistor outputs, 24 VDC, 0.5 A, order 3x 7TB710 terminal blocks separately. | | 7AC570.1 | 2003 accessory - aPCI slot cover | 7DO135.70 | 2003 digital output module, 4 FET outputs 12 to 24 VDC, 0.1 A, screw-in module, order 1x TB712 terminal block separately. | | 7AC911.9 | Bus connector, CAN | 7DO138.70 | 2003 digital output module, 8 outputs 24 VDC, 0.5 A, short circuit protection, thermal overload protection, screw-in module, order 1x TB712 terminal block separately. | | 7TB712.9 | Accessory terminal block, 12-pin, screw clamps 1.5 mm | 7DO139.70 | 2003 digital output module, 8 outputs 12-24 VDC, 0.5 A, short circuit protection, thermal overload protection, screw-in module, order 1x TB712 terminal block separately. | | 7TB712.91 | Accessory terminal block, 12-pin, cage clamps 1.5 mm | 7DO164.70 | 2003 digital output module, 4 FET outputs 48 to 125 VAC, 0.05 A, zero cross detection, screw-in module, order 1x TB712 terminal block separately. | | 7TB710.9 | Accessory terminal block, 10-pin, screw clamps 1.5 mm | 7DO435.7 | 2003 digital output module, 8 FET outputs 24 VDC, 2 A, outputs can be optionally used as inputs, order 3x 7TB710 terminal blocks separately. | | 7TB710.91 | Accessory terminal block, 10-pin, cage clamps 2.5 mm | 7DO720.7 | 2003 digital output module, 8 relay outputs 240 VAC / 30 VDC, 2 A, order 3x 7TB710 terminal blocks separately. | | 7TB710:90-01 | 2003 B&R terminal block, 10 pin 30 pieces, screw clamp | 7DO721.7 | 2003 digital output module, 4 relay outputs 240 VAC / 24 VDC, 4 A | | 7TB718.91 | Accessory terminal block, 18-pin, cage clamps 1.5 mm | 7DO722.7 | 2003 digital output module, 8 relay outputs 240 VAC / 24 VDC, 2.5 A | | 7TB718:90-02 | 2003 B&R terminal block, 18 pin 20 pieces, screw clamp | 7EX270.50-1 | 2003 CAN bus controller, 24 VDC, 4 W supply, 1 CAN interface, electrically isolated, network-capable, order 1x TB712 terminal block separately. | | 7TB718:91-02 | 2003 B&R terminal block, 18 pin 20 pieces, cage clamp | 7EX290.50-1 | 2003 X2X Link bus controller, 24 VDC, 3.2 W supply, 1 X2X Link interface, electrically isolated, order 1x TB712 terminal block separately. | | 7TB722.9 | 2003 terminal block, 22-pin, screw clamps | 7EX470.50-1 | 2003 CAN bus controller, 24 VDC, 14.5 W supply, 2 CAN interfaces, electrically isolated, network-capable | | 7TB722.91 | 2003 terminal block, 22-pin, cage clamps | 7EX477.50-2 | 2003 Remote I/O bus controller, 24 VDC, 14 W supply, 1 electrically isolated RS485 interface for Remote I/O bus connection | | 7TB733.9 | 2003 terminal block, 33-pin, screw clamps | 7EX481.50-1 | 2003 POWERLINK bus controller, 1 POWERLINK interface, 24 VDC, electrically isolated, order 1x TB704 terminal block separately. | | 7TB733.91 | 2003 terminal block, 33-pin, cage clamps | 7EX484.50-1 | 2003 POWERLINK bus controller, 4 POWERLINK interfaces, 24 VDC, electrically isolated, order 1x TB704 terminal block separately. | | 7TB736.9 | 2003 terminal block, 36-pin, screw clamps | 7EX770.50-1 | 2003 CAN bus controller, 100-240 VAC, 14.5 W supply, 2 CAN interfaces, electrically isolated, network-capable | | 7TB736.91 | 2003 terminal block, 36-pin, cage clamps | 7EX777.50-1 | 2003 remote I/O bus controller 100-240 VAC, 14 W supply 1 electrically isolated RS485 interface For connecting to remote I/O bus | | 7TB754.9 | 2003 terminal block, 54-pin, screw clamps | 7ME770.5 | 2003 configuration memory for CAN bus controller | | 7TB754.91 | 2003 terminal block, 54-pin, cage clamps | 7TB718.81 | Accessory terminal block, 18 pins, cage clamp, 1.5 sq. mm, vibration protected with screw flange | | 7TB772.91 | 2003 terminal block, 72-pin, cage clamps | 7CI410.70-1 | 2003 analog input module 2 temperature inputs inductive temperature measurement 0 degrees C to +300 degrees C Screw-in module | | 7TB712.81 | Accessory terminal block, 12 pins, cage clamp, 1.5 sq. mm, vibration protected with screw flange | 7IF311.7 | 2003 interface module, 1 RS232 interface, screw-in module | | 7CM211.7 | 2003 combination module, 8 inputs, 24 VDC, 4 ms, sink, 3 one-channel or 2 two-channel counters, or 2 incremental encoders, 20 kHz, 8 transistor outputs, 24 VDC, 0.5 A, comparator function, short circuit protection, 2 inputs, | 7IF321.7 | 2003 interface module, 1 RS485/RS422 interface, electrically isolated, network-capable, screw-in module | | 7CM411.70-1 | 2003 combination module, 3 inputs, 24 VDC, 50 kHz, sink, one-channel or two-channel counters, incremental encoder, 2 transistor outputs, 24 VDC, 0.5 A, comparator function, short circuit protection, 3 inputs, | 7IF361.70-1 | 2003 interface module, 1 RS485 interface, electrically isolated, network-capable, transfer protocol: Profibus DP, screw-in module | | 7MM424.70-1 | 2003 motor module, 4 motor digital output levels, 24 VDC, 3 A up to 50 | 7TB712:90-02 | 2003 B&R terminal block, 12 pin 20 pieces, screw clamp | | 7MM432.70-1 | 2003 motor bridge module, 2 motor-(H)- bridges, 10 to 30 VDC @ 4 A, peak current up to 8 A (max. 2 s), integrated current controller - electronic overcurrent protection, 12 digital 24 V inputs, optionally usable for end limit detection and position detection (Counter functions, 20 kHz A/B/R evaluation), order 1x TB710 and 1x TB718 terminal block separately. | 7DM438.72 | 2003 digital mixed module, 8 inputs 24 VDC, 1 ms, sink/source, 8 transistor outputs, 24 VDC, 0,5 A |
| |
